Our sales team: orders@fentex.co.uk
T: 01487 823184                  E: orders@fentex.co.uk
Our sales team: orders@fentex.co.uk
T: 01487 823184                  E: orders@fentex.co.uk
Go to content
LOOSE ABSORBENTS
The traditional approach to leak and spill clean-up.
Choose from hard granules or biodegradable fibres all made from recycled materials.

Exclusivly available from Fentex are The Evo LW30 Recycled Wood Fibre, a fire retardant absorbent particulate for use on industrial spillages and general clean-up duties, and the enviro-friendly EVO DRI Absorbent Granules made from recycled gypsum.
LW30 Recycled Wood Fibre

EVO Recycled® LW30

30 Litre bag of recycled wood fibre fire retardant absorbent particulate made in Britain. For use on industrial spillages and general clean-up duties. The lightweight loose particulate is easy to handle and absorbs liquids quickly and easily.

Safely Absorbs Fuel Oils, Cutting Fluids, Vegetable Oils, Grease, Ink, Inert Chemicals, Paint and other liquids.

  • Specially treated wood fibre
  • 100% recycled
  • Lightweight product to transport and in its use
  • Highly absorbent
  • Non flammable
  • Non abrasive

Gypsum absorbent Granules for oils fuels and general liquids

EVO DRI ABSORBENT GRANULES

20 Litre bag of environmentally friendly loose absorbent made in Britain.
EVO DRI is an industrial absorbent comprised of 100% recycled gypsum in the form of granules (light grey colour).
EVO DRI shows high absorption capacity, is easy to handle and transport, fireproof and can be used both indoors and outdoors.
For use on spills and leaks of non-hazardous fluids. Fast-acting and suitable for use in a wide variaty of applications, e.g. workshops, production areas, maintenance facilities, garages and any situation where leaks and spills occur.

  • Leaves surfaces safe, clean and dry
  • Eco-friendly - 100% recycled material
  • Reduced environmental impact and reduced CO²
  • Lightweight product to transport and in its use
  • Fireproof
  • Harmless to humans, animals and plants

WHY YOU NEED SPILL CONTROL
• Compliance with regulations
• Internal environmental/safety standards
• Compliance with ISO14001
• Insurance liability
• Duty of care
Pollution Prevention Guidelines
PPG26 states the requirement to have Spill Kits on site to respond to any spills. Spill Kits containing plugging compound, drain protection and oil or chemical absorbents should be on site. All staff should be trained in the use of this equipment. It is also recommended that vehicles transporting drums and IBCs carry a spill kit.
ISO 14001
Adequate spill protection equipment must be on hand.
Staff should be trained to use the equipment to protect the environment in the event of an accidental spillage.
Considerate Constructors Scheme
Environmental Checklist
Have any surface water drains been identified and sealed off?
Has a material storage area been identified?
Will drip trays, or similar, be provided for static plant equipment?
Are spill kits available and do employees know how to use them?
Have employees been trained in emergency spill response?
Back to content